Upgrade Via Usb - König Electronic SAT-SDHD50-KN Manual

4.5.2 Change PIN
Change PIN window is designed for changing the
smart card's PIN, which is required if you want to
change the maturity level settings. In order to change
the PIN, you must know the current PIN. Input the
new PIN twice (New PIN and Confirm PIN must be the
same). Move cursor to OK button and press OK key,
and then system will pop up a dialog informing you
about the changed result.
Note that the PIN can only include Arabic numerals!
4.5.3 Change Signature PIN
Same operation as Change PIN.
Note: The signature PIN will be locked after three
erroneous attempts to enter the correct PIN. If locked,
please call the dealer for help.
4.5.4 Maturity Level
Input the PIN then move cursor to Select Maturity level, you can select A-Over18, X-Erotic,
G-General audience, PG-Parental Guidance, move the cursor to Change Maturity level button
and press OK key and then system will pop up a dialog informing you about the changed
result.
4.5.5 Subscription Status
Show detail information of the Subscription Status.
4.5.6 Even Status
Show detail information of the Event Status.
4.5.7 Token Status
Show detail information of the Tokens Status.
4.6

Upgrade Via USB

1. Upgrade File: Show the Upgrade File.
2. Upgrade Mode: Select between All Code and Dump.
When switching the upgrade mode, "Upgrade File"
will show the corresponding file according to the table
below:
Upgrade Mode File feature
All code: File named "*.abs"
Main Code: File named "*.bin"
Radio Back: File named "*.m2v", The picture
will be used as both radio back and
menu back
Default db: File named "*.bin"
22