König Electronic SAT-SDHD50-KN Manual page 14

4. Motor Setting: Press OK to show the Motor
Setting window. Satellite: Press
satellite in circle. Or press OK to pop up the drop-
down list, then select the desired satellite in the list
and press OK to confirm.
Transponder: Same operation as above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position. Select the
proper value when you have rotated the antenna.
Go to X: Press OK to pop up the drop-down list, select the proper position (reference or from 1 to
63) to realize the selected position.
West <Save> East: Press ^ key to turn west, while pressing it to turn east.
Press OK to pop up the dialog "Are you sure to change this satellite's position?" Press OK at the
Yes button to save the current position, or press OK at the No button to cancel the operation.
Recalculation: Press OK to pop up the dialog "Are you sure to change this satellite's position?"
Press OK at the Yes button to recalculate.
5. Limit Setup: Press OK to pop up the Limit Setup
window.
Limit Setup: Press
Disable Limit, East Limit and West Limit. Limit
Setup: Move cursor to the Limit Setup button.
Press to turn west, or press
Go to Reference: Press OK to go to reference. If
you select Disable Limit in the above Limit Setup,
this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press
to switch between West and East, or press
to switch between North and South.
Press OK to enter the editing mode. Use the
numeric keys (0-9) to input the longitude or
latitude, press MENU or EXIT to exit. The range
of the longitude is from 0 to 180°, while the range
of the latitude is from 0 to 90°. If the entered
value is not within this range the system will pop
up a dialog "Out of Range" when you exit from
this window. Press OK to close this dialog.
7. Motor Setting: Press OK to enter into the Motor
setting window. Satellite, Transponder: Press
keys to select satellite or transponder,
or press OK to pop up the drop-down list and
select in the list.
to select the
to toggle among
to turn east.
14