Antenna Setup - König Electronic SAT-SDHD50-KN Manual

2. Press the green coloured key to pop up the Add
Satellite window. Operation is similar to Edit
Satellite.
3. Press the blue coloured key to pop up the dialog
"Are you sure to delete?" Select Yes and press
OK to delete the selected satellite. You can
cancel this operation by pressing OK at on the
NO button.
2.3

Antenna Setup

Part A: Fixed
Suppose that you have selected Fixed Antenna in
the Antenna Connection window.
1. Satellite: All selected satellites in the satellite
list are displayed in this item. Press
select the satellite in circle. Or press OK to pop
up the drop-down list, then select the desired
satellite in the list and press OK to confirm.
2. LNB Freq, Transponder, DiSEqC1.0,
DiSEqC1.1: Same operation as above.
3. 22K, 0/12V, Polarity: Press
circle.
Part B: Motor
Suppose that you have selected Motor Antenna in
the Antenna Connection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2 and
USALS. If you select DiSEqC1.2, the following
Local Longitude and Local Latitude items will turn
grey.
3. Delete All: Press OK to pop up the dialog "Are
you sure to clear set satellite position of this
tuner?" Press OK at the Yes button to clear all
memories about the position of the satellites that
are connected to the current tuner.
to
to select in
13