Get Started; Prepare The Remote Control; Turn On - Philips DCD3020 User Manual

All manuals and user guides at all-guides.com

4 Get started

Caution
‡
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Caution
‡
Risk of explosion! Keep batteries away from
KHDW VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV
LQ ÀUH
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
a
b
c
Note
‡ If you are not going to use the remote control
for a long time, remove the batteries.
‡ Do not use old and new or different types of
batteries in combination.
‡
Batteries contain chemical substances, so they
should be disposed of properly.

Turn on

Press .
» The unit switches to the last selected
source.
Switch to standby mode or Eco
power standby mode
Press again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.
EN 15