Advertisement
1 Receiving
1.1 Carefully remove all packaging material from the unit.
1.2 Read the entire unit installation guide.
1.3 Inspect the unit for damage.
1.4 Become familiar with unit and unit support components
8 1
Figure 1 - Unit Components
8 2
8 3
8 1
Figure 2 - Unit Support Components
If damage or loss is discovered, file a claim with the carrier who delivered the control unit. As much
identification as possible should accompany the claim, together with a full description of the damage.
When filing a claim with the carrier, photographs of the damage are very helpful.
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092
8 2
8 3
8 4
8 4
8 5
8 6
1) Pin-type door hinge
2) Shelf bracket
3) Separator angle
4) Intermediate angle
E87010-A0401-T002-A5-MCC
tiastar
Motor Control Center
TM
8 7
8 8
1) Locking latch
2) Pilot device panel
3) Top barrier plate
4) Pilot device mounting hole
(used when mounting directly to unit)
5) Operating handle
6) Racking lever
7) Swing plate
8) Terminal block
Page 3 of 12
A5E33045207A
Advertisement
