Advertisement
Section 7 continued
6" Unit Access for Maintenance 150-250A Circuit Breaker Units
Unit Access for Maintenance
1. Remove unit from structure
2. Remove screws "D" shown in figure 13- qty 4
3. Remove the handle mechanism from the unit
4. When reinserting the handle mechanism, the handle must be in the OFF position.
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092
Handle Mechanism
E87010-A0401-T002-A5-MCC
tiastar
Screw "D"
Motor Control Center
TM
Page 9 of 12
A5E33045207A
Advertisement
