2
Getting started
Installing the filter
Note: Make sure the appliance is unplugged from the electrical outlet before installing the filter.
1
2
1
To remove the back cover, hold the side of it with both hands and pull.
2
Pull the filter from the appliance.
3
Remove all packaging materials from the filter.
4
Put the filter back into the appliance.
5
Reattach the back cover.
Setting up the remote control
1
Pull out the plastic film on the remote control to
activate the battery.
2
Pair the remote control with the appliance if
you have multiple devices in one house (see the
chapter "Pairing your remote control").
Note: Place the remote control in the slot and it snaps in place
automatically.
3
Using the 3-in-1: air purifier, fan and heater
Air quality light
PM2�5 level
≤ 35
36-75
76-115
> 115
3
Air quality light color
Blue
Blue-purple
Purple-red
Red
4
5
Air quality level
Good
Fair
Poor
Very poor
EN
5