Troubleshooting - Philips AMF220 User Manual

3
Press and hold the
3 seconds to reset the filter replacement
time.
» The filter replacement alert
disappears from the screen.
4
Wash your hands thoroughly after
replacing the filter.
Before the filter replacement alert lights up
You can replace the filter before the filter replacement alert (
need to reset the filter lifetime counter manually.
1
Unplug the appliance from the power outlet and wait 10 seconds.
2
Plug the appliance into the power outlet.
3
Within 15 seconds after power on, press and hold the
3 seconds to reset the filter lifetime counter.
» The filter replacement alert
resetting the filter.
5

Troubleshooting

This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country.
Problem
The airflow from
the air outlet is
significantly weaker
than before.
button for
blinks once after successfully
Possible solution
• The surface of the filter is dirty. Clean the surface of the filter (see
the chapter "Cleaning and maintenance").
3
) lights up. If you do this, you
button for
4
EN
9