Welbilt MULTIPLEX FreshBlender Instruction Sheet page 2

8. Ice Bin Dump
A. Place ice dump chute as shown.
B. Place empty 5 gallon bucket at end of chute to
catch dispensed ice.
C. Press DISPENSE to start ice bin dump. Press PAUSE
to halt dispensing as needed to dispose of ice.
Press RESUME to resume dispensing.
D. Dispense ice until bin is empty.
E. Remove ice dump chute and set aside.
F. Press NEXT once all ice is dispensed.
NOTE: Ice bin must be empty before pressing NEXT button.
2 of 4
Document Number: MPX-i-032 08/13/2020
Subject: FreshBlender Ice Maker Descale
9. Prepare for descaling ice maker.
A. Fill shaker jug with 1 gallon of lukewarm water
and mix in approved descale solution as per
manufacturer's instructions.
B. Use key to unlock the top machine door.
C. Connect the CIP hose to the CIP pump quick
disconnect fitting located on front of machine.
NOTE: Dipping connector end of CIP hose in clean warm
water will make connection easier.
D. Place other end of cleaning hose into shaker jug
with descale mixture.
E. Press CONFIRM. Ice maker descale cycle will begin
countdown followed by descale ice production.