Voltage Selector Switch
WARNING
Electric Shock. Never change the voltage selector
switch while the engine is running or the controller
is on. Doing so could result in death, serious injury
or equipment damage.
The voltage selector mechanically configures the
generator main windings. The unit is equipped with either
a 3- or a 4-position switch. Available configurations for
each are shown in the table below.
3-Position Switch
• Hi wye
Available
• Low wye
Configurations
• Zig zag
Lockout Function
The voltage selector switch is equipped with a lockout
mechanism. When engaged, the switch is locked in
place, preventing configuration changes.
NOTE: See
Using the Voltage Selector Switch
more information.
Owner's Manual for Mobile Generator
(000302)
4-Position Switch
• Hi wye
• Low wye
• Zig zag
• Delta
for
General Information
23