Advertisement
(2) Remove the terminal cover.
• Remove the terminal cover by pulling it straight up. The terminal cover is fitted
with an interlock switch. This interlock switch may be damaged if the terminal
cover is removed while being tilted.
(3) Measure the voltage at the high voltage cable connection.
Note
・ Use a taster with a measurement range of 450V DC or more.
ー Verify that the tester indicates 0V and go to the next step.
・ Verify that the waterproof rubber on the terminal cover is securely installed.
・ Be careful not to damage the interlock, and install it securely.
(4) Install the terminal cover.
0V
16
- Quick Links:
- Overview of the High Voltage Battery
Hide quick links:
Advertisement
