Frame Operation - Brookstone Digital Photo Frame User Manual

fRaMe oPeRaTIon

attaching the stanD
Line up pins on stand with holes on the frame and insert stand.
Rotate stand to first position for landscape viewing (see A). Or, rotate stand to second
position (see B) and stand the frame upright for portrait viewing (see C).
B C
A
turning the frame on/off
Plug in adapter.
Press and hold the POWER BUTTON until the Brookstone logo appears
®
on screen to turn on the frame (5-6 seconds). The Home Screen with memory
bar appears on the display after the frame is turned on. See below.
note: a blue fill in the bar indicates used memory. When the bar is completely blue,
the memory is full.
Press and hold POWER BUTTON for 2 to 3 seconds to turn off the frame.
The Brookstone logo will appear on the screen as it is shutting down.
®
inserting a memorY carD or flash Drive
With the frame powered on, insert your memory card or flash drive into the appropriate
slot. The Home Screen will show for 60 seconds if no selection is made. After 60
seconds the media will auto-play.
Note: When a memory card is inserted into the frame, the frame's internal memory
(media you have copied to the frame's drive) will not be available.
using the volume
Press VOLUME and VOLUME to adjust volume level. Volume graphic appears
on screen to show volume level.
5