Brookstone Digital Photo Frame User Manual page 13

PhoTos
(continued)
I want to...
aDvanceD
Copy my photos
onto the frame from
my memory card or
flash drive (continued).
Do thIs...
3. Press SELECT.
4. Press MENU.
5. Press to go to the "Copy" menu selection.
6. Press or
then press SELECT.
7. Search for photo by pressing
8. Highlight your chosen photo and press SELECT.
9. A graphic will appear in the lower right corner
of the photo to confirm it is to be copied.
10. Repeat steps 7 and 8 to select additional photos
to be copied.
11. After all photos to be copied are selected, press
MENU or EXIT. The "Copy" menu will highlight.
12. Press or
13. Press SELECT. After all photos are copied, the unit
will revert to Thumbnail mode.
helpful hints: to deselect a photo that has been
selected to be copied, highlight the photo and press
select. the graphic will no longer be in the lower
right corner of the photo.
to select all photos on your media card or flash drive
to be copied while using the "select to copy" function,
press and hold select for 2 seconds. the
will appear in lower right corner of every photo.
COPY ALL PHOTOS
1. Insert your memory card or flash drive into the frame.
2. Press or
3. Press SELECT.
4. Press MENU.
5. Press to go to the "Copy" menu selection.
6. Press or
7. Press SELECT.
8. Prompt will come on screen to confirm all photos to
be copied. Press SELECT to confirm. After all photos
are copied, the unit will revert to Thumbnail mode.
12
to highlight "Select to Copy" and
,
to highlight "Copy Selected. "
to highlight PHOTOS.
to highlight "Copy All. "
, or .
graphic