Table of Contents
Advertisement
13
Maintenance
13.1 Getting your bicycle serviced
QWIC recommends to have your bike regularly checked with your dealer. It is
advisable to have your first check-up with the first 3 months and the second
maintenance should take place after 1 year. Please keep in mind that with regular
check ups, damage and therefore costs will be prevented. Of course you can add to
that by taking note of the following tips:
13. 2 General maintenance
1
Check tire pressure
2
Check brake wear and tear, minor adjustments
3
Clean paddling sensor with sponge and warm water.
4
Grease chain
5
If spokes are bent or damaged, immediately have it repaired by the dealer.
13.3 Cleaning
When cleaning the bike, first remove dirt with a brush or cloth bevore washing with
warm water. This will make your bike look as good as new! Regularly cleaning your
bike will improve its life-span. Be careful not to use excessive amounts of water in
the battery area. The sensor (near the crankshaft) should be clean from dirt.
Never use a high-pressure sprayer!
13.4 Treatment
Complementary to regulary cleaning your bike, we recommend to directly take
care of some parts after cleaning. We advise to grease all chromed parts, plain
aluminium and stainless-steel parts with Vaseline to prevent from oxidation (rust).
Moving elements require grease/oil. It is advisable to grease chain, cogwheel and
spindles on a regular basis. Your dealer can do this for you.
QWIC Electric bicycles Manual
21
Advertisement
Table of Contents
