Zamel RZB-05 Quick Manual

TIME PROGRAMMING
Press PROG push-button of ROP-01 device for a longer time till LED red diode
switches on (constant signal). Next release PROG push-button. Wait (for about
5 seconds) till LED red diode switches on (first signal pulsates, next the signal is
constant).
Press PROG push-button of ROP-01 device and then release it. LED red diode
switches off and then switches on (signal pulsates). Every LED diode pulse
equals 1 second.
After the adjusted time is finished (the number of LED red diode flashes) press
PROG push-button and then release it - TIME IS ADDED.
Maximum time is 18 hours.
RADIO TRANSMITTERS DELETION
Press PROG push-button of ROP-01 device for a longer time.
After 5 seconds LED red diode switches on (signal pulsates) and then it switches
off.
Release the push-button in ROP-01 - MEMORY IS DELETED.
COOPERATION AND OPERATING RANGE
Symbol ROP-01 ROP-02 ROB-01 SRP-02
RNK-02 180 m 200 m 200 m 200 m
RNK-04 180 m 200 m 200 m 200 m
P-256/8 230 m 250 m 250 m 250 m
P-257/4 (2) 180 m 200 m 200 m 200 m
RNM-10 230 m 250 m 250 m 250 m
RNP-01 160 m 180 m 180 m 180 m
RNP-02 160 m 180 m 180 m 180 m
RNL-01 160 m 180 m 180 m lack*
RTN-01 200 m 200 m 200 m 200 m
RCR-01 160 m 180 m 180 m lack*
RTI-01 160 m 180 m 180 m 180 m
RXM-01 230 m 250 m 250 m 250 m
* 1-channel transmitters do not cooperate with roller blind controllers.
CAUTION: The given range concerns open area - an ideal condition without any
natural or artificial obstacles. If there are some obstacles between a transmit-
ter and a receiver, it is advisable to decrease the range according to: wood and
plaster: from 5 to 20 %, bricks: from 10 to 40 %, reinforced concrete: from 40 to
80 %, metal: from 90 to 100%, glass: from 10 to 20 %, Over- and underground
medium and high electrical power lines, radio and television transmitters, GSM
transmitters set close to a device system have also a negative influence on the
range.
RWG-
SRP-03 RWL-01 ROM-01 ROM-10 RDP-01 RTN-01
01
200 m 250 m 180 m 250 m 250 m 180 m
200 m 250 m 180 m 250 m 250 m 180 m
250 m 300 m 200 m 300 m 300 m 230 m
200 m 250 m 180 m 250 m 250 m 180 m
250 m 300 m 200 m 300 m 300 m 230 m
180 m 200 m 160 m 200 m 200 m 160 m
180 m 200 m 160 m 200 m 200 m 160 m
lack* 200 m 160 m 200 m 200 m 160 m
200 m 250 m 200 m 250 m 250 m 200 m
lack* 200 m 160 m 200 m 200 m 160 m
180 m 200 m 160 m 200 m 200 m 160 m
250 m 300 m 200 m 300 m 300 m 230 m
UNIVERSAL WIRELESS CONTROL SET
RZB-05
TECHNICAL DATA
Input (supply) terminals:
Input rated voltage:
Battery life:
Input voltage tolerance:
Nominal frequency:
Nominal power consumption:
Number of operation modes:
Number of channels:
Transmission:
Transmission way:
Maximum number of transmitters:
250 m
250 m
Time adjustment:
300 m
Optical signalling:
250 m
300 m Relay output clamps:
200 m
Relay contacts parameters:
200 m
Number of terminal clamps:
200 m
Section of connecting cables:
250 m
Ambient temperature range:
200 m
Operating position:
200 m
300 m
Mounting:
Casing protection degree:
Protection level:
Overvoltage category:
Pollution degree:
Surge voltage:
Dimensions:
Reference standard:
P-257/2
-
3 V (battery CR2032)
3 ÷ 5 years
-
-
-
-
2
radio 868,32 MHz
unidirectional
Coding: addressing transmission
-
Range: up to 250 m in the open air up to 230 m in the open air
-
LED red diode
-
1NO/NC 5A / 250V AC AC1
-
-
-
-10 ÷ +55
o
free
installation cable box Ø60
-
IP20 (EN 60529)
III
-
2
-
74 x 33 x 11,5 mm
Weight: 0,020 kg
PN-ETSI EN 300 220-1
PN-ETSI EN 300 220-2
ROP-01
L, N
230 V~
-
-15 ÷ +10 %
50 / 60 Hz
0,29 W
5
1
32
1 s ÷ 18 hours (every
second)
12, 11, 14
1250 VA
5
up to 2,5 mm
2
C
mm
II
II
1 kV (EN 61000-4-5)
47,5 x 47,5 x 20 mm
0,043 kg
PN-EN 60669, PN-EN
60950, PN-EN 6100