Yamaha MTN320-A Owner's Manual page 32

Instrument and control functions
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the center cover by re-
moving the screws.
3
1
1. Center cover
2. Screw
3. Remove the rider seat by remov-
ing the bolts. Lift the rear of the
rider seat and pull it backward.
1
1. Rider seat
2. Bolt
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
2
2
1
2
1. Projection
2. Seat holder
2. Install the rider seat bolts.
3. Install the center cover by install-
ing the screws.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
3-18