DEI PCX-7420 B Operation Manual page 22

OUTPUT:DISABLE
Disables the output; the same as pressing the front-panel ENABLE button
until the Enable LED is unlit. Example:
OUTPUT:DISABLE
OUTPUT:DISABLE
OUTPUT:ENABLE
Enables the output; the same as pressing the front-panel ENABLE button until
the enable LED lights green. Example:
OUTPUT:ENABLE
OUTPUT:ENABLE
(if successful)
If a fault is preventing the PCX-7420 B from enabling, clear the fault by
pressing the HOME button. If the keyswitch is not ON or the rear enable
connection is not made fix the system by turning on the keyswitch or
connecting the rear enable BNC.
*RECALL n
Loads saved configurations and sets the PCX-7420 B to use them. The value
of n must be between 1 and 5. Example:
*RECALL 2
*RECALL 2
*SAVE n
Saves the current configuration to non-volatile memory. The value of n must
be between 1 and 4. Example:
*SAVE 3
*SAVE 3
STATUS:KEYSWITCH?
Returns whether the keyswitch is enabled or disabled. Example:
STATUS:KEYSWITCH?
Disabled
STATUS:REAR:ENABLE?
Returns whether the rear enable is enabled or disabled. Example:
STATUS:REAR:ENABLE?
Disabled
For more information: 970.493.1901 or
Document #7650-0037 Rev A2. © Copyright 2019 Directed Energy, Inc. All rights reserved.
Page 22 of 28
sales@directedenergy.com