Set The Bias Output Current; Set The Main Pulsewidth - DEI PCX-7420 B Operation Manual

3. Rotate the encoder knob to change the value. The range is 3 A to 15.7 A.
4. Press the encoder knob to change the multiplier to x0.001, x0.010, x0.100,
x1.000, or x10.000 indicated by the
asterisk (*).
5. When the correct value is displayed,
press the Home button.

Set the Bias Output
Current
BIAS:CURRENT:SETPOINT?
BIAS:CURRENT:SETPOINT n
1. Rotate the encoder knob until Bias
Current is displayed on the screen.
2. Press the encoder knob to update the
bias current.
3. Rotate the encoder knob to change
the value. The range is 0 A to 5.8 A.
4. Press the encoder knob to change the
multiplier value to x0.001, x0.010,
x0.100, or x1.000 indicated by the
asterisk (*).
5. When the correct value is displayed,
press the Home button.


Set the Main Pulsewidth

TRIG:INT:MAIN:PULSEWIDTH?
TRIG:INT:MAIN:PULSEWIDTH n
1. Rotate the encoder knob to the Main Pulsewidth screen.
2. Press the encoder knob to update the
pulse width.
3. Rotate the encoder knob to change
the value. The range is 0.100 µs to
5000 µs.
4. Press the encoder knob to change the
multiplier value to x25 ns, x100 ns,
x1.000 µs, x10.000 µs, or x100.000
µs.
5. When the correct value is displayed,
press the Home button to return to
the Home screen.
For more information: 970.493.1901 or
Document #7650-0037 Rev A2. © Copyright 2019 Directed Energy, Inc. All rights reserved.
Press KNOB to update
Press KNOB to update
Page 12 of 28
sales@directedenergy.com
Main Current
------------
11.234 A
*
Bias Current
------------
1.234 A
Bias Current
------------
1.234 A
*
Main Pulsewidth
---------------
0.009,500 ms
Main Pulsewidth
---------------
0.009,500 ms
x100.000 us