Set The Termination - DEI PCX-7420 B Operation Manual

Gate information. It is recommended to
disable the system prior to switching
between internal
triggering.
1. Rotate the encoder knob to the
Trigger Type screen.
2. Press the encoder knob to select the
Trigger Type.
3. Rotate the encoder knob between
Internal and External Gate.
4. When the correct Trigger Type has
been selected, press the Home button
to return to the Home screen.


Set the Termination

TRIG:EXT:TERM?
TRIG:EXT:TERM n
1. If you selected External Trigger, the
correct termination must be set.
2. Rotate the encoder knob to the Trigger
Termination screen.
3. Press the encoder knob to select the
termination value.
4. Rotate the encoder knob between 50
Ω and 10 kΩ.
5. Press the Home button to return to the
Home screen.
For more information: 970.493.1901 or
Document #7650-0037 Rev A2. © Copyright 2019 Directed Energy, Inc. All rights reserved.
and external
Page 14 of 28
Trigger Type
------------
Internal
Press KNOB to update
Trigger Type
------------
** Internal **
External Gate
Termination
-----------
50 ohm
Press KNOB to update
Termination
-----------
** 50 ohm **
10k ohm
sales@directedenergy.com