Using The Device; Powering On And Adjusting The Volume; Tuning A Radio Station - Silvercrest Scanradio SR-1300 Manual

Scanradio SR-1300

Using the Device

Powering On and Adjusting the Volume

Rotate the volume adjustment knob (7) counter-
clockwise, to power the radio on. This will adjust the
audio volume at the same time. Turn the volume
adjustment knob counter-clockwise to increase the
sound volume, or turn it clockwise to lower the
volume.
Turning the volume adjustment knob clockwise as
far as it goes will power the device off.

Tuning a Radio Station

Use the volume adjustment button (7) to set the
desired sound volume.
Press the SCAN button (2) to launch an automatic
station search. As soon as a station has been found,
the scan will stop and the radio programme can be
listened to.
To switch to a different station, press the SCAN
button (2) again. The next available station will be
searched for.
58 - English
To be able to receive any radio stations,
the supplied
connected
receptacle. The cable of the headphones
is used as antenna.
headphones
to the
must be
headphones