Introduction; Inserting The Batteries; Connecting The Headphones - Silvercrest Scanradio SR-1300 Manual

Scanradio SR-1300

Introduction

Thank you for choosing a SilverCrest product.
This scan radio receiver offers simple and convenient
radio listening. Via the one-touch button functionality
you can easily toggle to the next available station.

Inserting the Batteries

Insert the supplied batteries. Open the battery
compartment cover on the back panel of the device by
sliding it in the direction of the printed arrow. Insert the
batteries with the correct polarity (+ and -). The correct
polarity is labelled on the batteries and inside the
battery compartment. Next close the battery
compartment cover.
If the output volume weakens or the device fails to
respond, replace the batteries with new batteries of the
same type. The device will not inform you about weak
batteries.

Connecting the Headphones

Insert the jack-type plug of the supplied headphones
into the headphones receptacle (6) on the side panel of
the unit.
English - 57