Changing The Battery - Beaba EXACTO Instruction Manual

Changing the battery

GB
• Use your fingernail to lower the flap locking the battery
housing cover in place (9a).
• With a non-metallic object, push back the plate holding
the battery in its housing.
• Remove the battery.
• Insert a Lithium CR 2032 3-volt battery into the housing,
with the + pole at the top
• Press the battery to lock it in place (9b).
• Replace the battery housing cover.
• Set the clock as described on page 4.
9a 9b
Your thermometer is designed to measure temperatures
between 0°C and 50°C.
• If the temperature to be measured is lower than this
band, the symbol "LO" will appear.
• If the temperature to be measured is higher than this
band, the symbol "HI" will appear.
Depending on whether the thermometer is operating in
forehead reading or ear reading mode, the following
symbols may appear. (10)
Figure 10
46