Clear Button; Auxiliary Port - HP ProCurve RSVLC-0501 Installation And Getting Started Manual

Introducing the HP ProCurve RSVLC-0501
Back of the Access Point

Clear Button

This button is used for these purposes:
■
■
■

Auxiliary Port

The Auxiliary port is reserved for future use.
1-8
Deleting Passwords - When pressed by itself for at least one second, the
button deletes any access point console access passwords that you may
have configured. Use this feature if you have misplaced the password and
need console access.
To Restore Custom Default Configuration – When pressed with the
Reset button in a specific pattern, any configuration changes you may
have made through the access point console or the Web browser interface
are removed, and the customer-specified default configuration is restored
to the access point. For the specific method to restore the customer
default configuration, see "Restoring Custom and Factory Default Config-
urations" in chapter 5, "Troubleshooting" of this guide.
Restoring Factory Default Configuration - When pressed with the
Reset button in a specific pattern, any configuration changes you may
have made through the console, the Web browser interface, and SNMP
management are removed, and the factory default configuration is
restored to the access point. For the specific method to restore the factory
default configuration, see "Restoring Custom and Factory Default Config-
urations" in chapter 5, "Troubleshooting" of this guide.