Advertisement
Available languages
Available languages
EN
HOW TO USE THE MECHANIC CONTROL APPLIANCE RH01F20M-W
Appliance switching on and off
This heater is equipped with dual illuminated switch (pos. C on fig. 4), wich serves for selection of power:
"I" - 800W
џ
"II" - 1200W
џ
"I" + "II" - 2000W
џ
To switch on the appliance press the end of the key marked with selected or desired power 'I' or 'II,' or both simultaneously. To switch off the
appliance press the end of the key marked with „0".
ATTENTION! The power selection switch is a functional key. Complete turning off of the appliance is carried out ONLY by taking the
power supply cord out of the power supply socket.
Setting the room temperature
The heater is equipped with mechanical thermostat to set and maintain the room temperature. To set the desired air temperature in the
room turn the thermostat knob (pos. E on fig. 4) in direction from 1 to 7 on the scale. You may decrease temperature by turning the knob in
opposite direction. When reaching the desired room temperature, turn the thermostat knob slowly (pos. E on fig. 4) counter-clockwise
until the double switch LED is switched off. Left in such position the appliance shall automatically maintain the temperature set.
Anti-freeze function
The thermostat is able to maintain a minimum temperature in the room. This is the Anti-freeze function. The function is activated with the
knob in end position in direction of temperature decrease marked with the star symbol
maintains a room temperature of 4-8 °C.
IMPORTANT! In order to allow the convector operates in Anti-freeze mode it is necessary:
Its power cord be plugged in a socket in the room mains;
џ
The convector double switch be in position ON 'I' or 'II,' or both simultaneously.
џ
The thermostat knob be in position marked with star.
џ
15
on fig. 4. In this position the thermostat
EN
Advertisement
