STICK-ST [eng] LIGHT PROGRESS SECURITY WARNING Our Company has ensured that every care is taken in the design and production of its machinery. In order to guar- antee, as far as possible, that it is safe when used correctly. However, the laws on accident prevention require all users of the machinery to ensure that whoever is responsible for installation, maintenance, use and sale of these products is shown the instruction provided by our company and is made aware of the precautions to be taken.
STICK-ST [eng] LIGHT PROGRESS CONVENTIONAL SYMBOLS NOTICED ON DEVICES SUBSTITUTED ITEMS MUST BE PERFORMED RESPECTING THE LOCAL LAWS. RECYCLE THE STUFFS THAT COMPOSES THIS PRODUCT. OBLIGATION TO CONSULT THESE INSTRUCTIONS BEFORE USE THIS PRODUCT DANGER OF ELECTRICAL SHOCK; REMOVE TENSION TO THE SYSTEM BEFORE PERFORMING ANY OPERATION.
Page 4
STICK-ST [eng] LIGHT PROGRESS DEVICE DESCRIPTION UV STICK E2/75H-ST-NX-NT is a two lamps germi- cidal device , placed on a stand, with four wheels for easy mobility. It works on direct radiation at 360 de- grees and sterilizes irradiated air and surfaces. The UV-C lamps, with emission peak at 235.7 nm.
STICK-ST [eng] LIGHT PROGRESS BENEFITS AND ADVANTAGES a) DEEP AND CONTINUOUS DISINFECTION This device can be switched on continuously without people being present (i.e. during the night for 2-3 hours). The dis- infection of air, machinery, and everything that is contained inside the room allows beginning the work day in ideal hy- gienic conditions.
Page 6
STICK-ST [eng] LIGHT PROGRESS RECEPTION AND ASSEMBLY Handle with care as fragile material. Verify the integrity of the packaging, and please be careful not to damage the con- tents when using sharp blades or cutters to open the box. Remove the unit from the box, then inspect it immediately to ensure that no damage has occurred during transport.
STICK-ST [eng] LIGHT PROGRESS INSTALLATION Take the device to the room to be disinfected, and place it almost at central position. In case of more than one device, you should place them so that UV irradiation is uniformly distributed, avoid creating shaded areas.
Light Progress. In case of necessity, please, send the device back to our facility for any kind of repairs. If this is not possible, you can order the entire power supply conduit for replacement (see Table 1 for code).
10 working days from release date. MANUFACTURER RESPONSABILITY AND COMMITMENTS Light Progress do not take any responsibility for any damage to persons or property, due to failure to follow these instructions. We recommend you to carefully read all the given instructions.
STICK-ST [eng] LIGHT PROGRESS DECLARATION OF COMPLIANCE We, LIGHT PROGRESS s.r.l., hereby declare under our own responsibility that the following units of own production: UV-STICK E2/75H-ST-NX-NT series are in accordance with EEC directive 2014/30/EU (Electromagnetic Compatibility) are in accordance with EEC Machinery Directive dispositions 2006/42/EU are in accordance with EEC Low Voltage Directive 2014/35/EU...
Need help?
Do you have a question about the UV-STICK E2 and is the answer not in the manual?
Questions and answers