Blaupunkt Malibu C50 Operating Instructions Manual page 12

If there is no cassette inserted in
the unit:
Press the
The control panel opens out towards
you.
Insert a cassette with its open edge
on the right into the cassette
compartment.
Close the control panel.
The side of the cassette that is upper-
most is then played first of all.
If a cassette is already inserted in
the unit:
Keep pressing the CD•C button @
until "CASSETTE" appears in the
display.
The cassette plays in the direction that
was set last.
Press the
The control panel opens out towards
you and the cassette is ejected.
Close the control panel or
insert a new cassette.
To switch between the two play-
back directions SIDE A and SIDE
B, press button 2
Note:
The playback direction is automatically
switched when the end of the tape is
reached (autoreverse).
12
button 9.
button 9.
>.
To play the next track or any track
thereafter, press the
once or several times.
"CPS FF" appears in the display togeth-
er with the number of tracks to be
skipped. The tape fast forwards to the
next track or any other subsequent track
that you selected.
To play one of the previous tracks,
button : once or
press the
several times.
"CPS FR" appears in the display togeth-
er with the number of tracks to be
skipped. The tape is rewound to the
beginning of the current track or to the
beginning of any other previous track
that you selected.
Press button 4 RPT >.
The current track is repeated. RPT ap-
pears in the display. When the end of
the track is reached and the tape is re-
winding, "REPEAT TRCK" appears in
the display.
If you want to stop the repeat
function, press button 4 RPT >
again.
Normal playback is then continued. RPT
disappears from the display.
Press the OK button ; for longer
than two seconds.
button :