Blaupunkt Malibu C50 Operating Instructions Manual page 10

The unit tunes into the next receivable
station.
You can also tune into stations
manually.
Press either the
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Press the MENU button 8.
Keep pressing the
until "SENS" appears in the display.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI" means that
the tuner is highly sensitive. "SENS LO"
means it is set to the lowest sensitivity
setting. If "SENS LO" is selected, "lo"
lights up in the display.
Set the required sensitivity using
buttons :.
the and
When you have finished making
your changes, press the MENU
button 8 or OK ;.
Select the required memory (FM1,
FM2 or FMT) or the AM frequency
range.
10
button :.
or
button :
Tune into the station that you want.
Press one of the station buttons
1-6 > for longer than one second
to store the station to that button.
You can automatically store the six sta-
tions with the strongest reception in your
area. The stations are stored in the FMT
or AM memory depending on the se-
lected frequency range.
Note:
Stations that were previously stored in
this memory are deleted in the process.
Briefly press the TS button ?.
The automatic station storing procedure
begins. "T-STORE" appears in the dis-
play. After the process is completed, the
station that is stored in location 1 of the
respective memory level will be played.
Select the memory or frequency
range.
Press the preset station button 1-6
> of the station you want to listen
to.
You can briefly play all receivable sta-
tions. You can set the scanning time in
the menu.