Mounting The Bar Speaker On A Wall - Sony HT-A7000 Help Manual

Help Guide
Sound Bar
HT-A7000

Mounting the Bar Speaker on a Wall

Bar speaker
Note
Prepare screws (not supplied) that are suitable for the wall material and stability. Depending on the wall material, the wall may be
damaged.
Fasten the screws securely in the wall beam.
Hang the bar speaker horizontally on the reinforced wall.
Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation.
Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall stability, improper
screw installation, natural disasters, etc.
Two or more persons are required to hang the bar speaker for safety.
Prepare two screws (not supplied) that are suitable for the holes on the wall mounting bracket (supplied).
1
(a) 4 mm (3/16 in)
(b) More than 30 mm (1 3/16 in)
Hole on the wall mounting bracket
(c) 5.0 mm (13/64 in)
(d) 10 mm (13/32 in)
Measure the depth of the mounted TV (e) and find out the required space between the bottom of the TV and
2
the top of the bar speaker (f) in the table below.
19