Advertisement
NOTE:
Before assembly, carefully remove inspect all parts as listed in the
Package Contents table. If any part appears missing or damaged, do not
assemble this product. Contact Hampton Bay Customer Service.
A
D
B
C
Tube
Lamp
Fuse
Male plug
E
Female plug
F
Wire
G
Accessories package
Assembly
□ Put the lamp (B) into the tube (A). See Figure 1.
□ Repeat step 1 until all the lamps are into the the tubes. See Figure 2.
Fig.1
Fig.2
E
G
A
B
Use and Care Instructions
WARNING:
products that have cut, damaged, or trayed wire insulation or cords, cracks in
the lamp holders or enclosures, loose connections, or exposed copper wire.
CAUTION:
F
trees having needles, leaves or branch coverings of metal or materials which
look like metal, and b) Do not mount or support strings in a manner that can cut
or damage wire insulation.
When the product is placed on a live tree, the tree should be well maintained and
fresh. Do not place on live trees in which the needles are brown or break off easily.
Keep the tree holder filled with water.
If the product is placed on a tree, the tree should be well secured and stable.
STORAGE GUIDELINES
When storing the product, carefully remove the product from wherever it is placed,
including tree, branches, or bushes, to avoid any undue strain or stress on the product
conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.
User Servicing Instructions
100
100
REPLACING THE FUSE
2
WARNING:
(provided with product).
WARNING:
a safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
1.Grasp the plug and remove from the receptable or other outlet device. Do not unplug by
pulling on the cord.
2.Slide open the fuse cover on top of the attachment plug towards the blades.
3.Remove the fuse (C) carefully.
4.Slide the fuse access cover close on top of the attachment plug.
REPLACING THE LAMP
CAUTION:
contact.
1.Remove the old lamp from the tube (A).
2.Remove the old bulb from the base.
3.Insert the new bulb to the base.
4.Insert the new lamp to the tube (A).
5.Repeat step 1 to step 4 until all the lamps are into the the tubes.
Before using or reusing, inspect the product carefully. Discard any
T
r o
d e
c u
t e
e h
i r
k s
o
f f
e r i
a
d n
e
e l
t c
Risk of fire. Replace the fuse only with 3 Amp, 125 Volt fuse
Risk of fire. Do not replace the attachment plug. The plug contains
C
Risk of fire. Do not deliberately reposition either lamp holder
Blub
A
Base
B
c i r
h s
c o
: k
) a
o D
n
t o
n i
t s
l l a
n o
A
B
Advertisement
