Sony HCD-FX300i US Service Manual page 5

CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistors referring to the fi gure below.
• PT board (C905) (Except 120V AC area in E, Chirean and Pe-
ruvian models only)
• PT-SW board (C905) (120V AC area in E, Chirean and Peru-
vian models only)
• MAIN board (C903, C904) (All models)
Both ends of respective capacitors.
– PT Board (Conductor Side) –
C905
800 :/2 W
– MAIN Board (Conductor Side) –
800 :/2 W
– PT-SW Board (Conductor Side) –
C905
C903
800 :/2 W
C904
800 :/2 W
HCD-FX300i
Ver. 1.1
5