Installing The Battery - Blackberry 950 Installation And User Manual

Get to know your handheld — Installing the battery 21
When you receive a new message and remove the handheld from
the holster within five seconds, notification (based on how you've
set it) stops and the most recently received message will be open. If
you pull the handheld out of the holster and quickly replace it,
notification stops but the message will remain marked unread. See
"Setting message notification" on page 37 for information on
notification options.
Serial port
The serial port on the bottom of the handheld fits into the prongs of
the docking cradle. You must connect the docking cradle to your PC
to use the Desktop Software (provided on the CD with your
package).
The Desktop Software supports standard USB-to-serial port
converters. See Chapter 3, "Using the Desktop Software" for more
information on installation procedures and serial connection details.
Docking cradle
The docking cradle provides a link between the handheld and your
PC, so that you may use the Desktop Software provided with your
package. See Chapter 3, "Using the Desktop Software" for more
information on the cradle and the capabilities of the Desktop
Software.

Installing the battery

Depending on usage, the handheld can operate for weeks using a
single AA alkaline battery. The handheld will work best if you use a
standard, high quality alkaline battery.
We recommend against using Lithium AA batteries or ULTRA
batteries: you will get the same amount of battery life from an
alkaline because the handheld is a "low drain" device.
Installation and User's Guide