Summary of Contents for XTC ATS-UNI UNIVERSAL TURN SIGNAL SYSTEM
Page 1
ATS-UNI UNIVERSAL TURN SIGNAL SYSTEM Thank you for purchasing XTC Power Products Automatic Self -Canceling Turn Signal System. Our Easy Install Turn Signal System is unique from the other kits on the market. This kit is from our Plug & Play™ product line. With only attaching power, ground and install the four LED Turn Lights.
Page 2
WARNING! Verify that there is clearance before drilling the holes for the LED's and keep the harness away from any hot or moving parts. 2. Install the two front LED lights - The front LED Turn Indicators can be mounted with the rubber grommet or without. If the grommet is not being used drill 5/8”...
Page 3
WARNING! Verify that there is clearance behind dash for Turn, Hazard and Horn switch's 6. Install Turn and Horn/Hazard Switch – The switches can be mounted different places on the dash, we typically use the driver left side. Using the provided switch template mark the dash, cut out the two rectangles. Push the switch wires through and apply grease (see Below) attach to switch and install in dash.