XTC PCS-S2-KBUS Quick Manual

Honda Talon Keyed Accessory Busbar
Thank you for purchasing our Plug & Play Keyed Busbar Power Out System. The Honda Talon only has a 10 AMP
accessory port (Cigarette Lighter Type). For sample, a Horn uses 6 amps, a Dome light uses ½ to 1-AMP, so you can
see that the accessory port is extremely limited. Adding this system gives the original 10-AMP and adds another 35-
AMP circuit. So, most accessories like Horn, Turn Signals, Rock Light, Dome Lights, Grille Lights, Rear Lights and so on
can be on a Plug & Play Keyed Circuit.
Please read the instructions fully and familiarize yourself with the components before starting the install.
Diagram Not to Scale
Remove the hood and the Dash Cover by removing the appropriate fasteners.
Using the provided Self Tapping Screws mount the Busbar and Relay on the Frame Rail.
Un-plug the Blue Accessory Port Connector and plug the system in. If the port is already being used, XTC offers a
Power Port Splitter, part number HON-AUX-SPLIT to add a second output.