Table of Contents
Advertisement
Set the camera to
VR mode with the resolution ile size of
/
/
, with the selectable option of underwater
. Pair the camera and the
Mini BLUETOOTH Remote Control, refer to (
35 37) for detailed instructions. When pairing is successful, insert the camera into the Waterproof
Housing and secure.
In order to prevent deformaties or permanent damage to the Waterproof Housing accessory, please refer to the diagram (
67) for your reference
and do not overtighten screws.
Before using your camera in or submerging under water, please make sure you irst securely enclose it inside the Waterproof Housing. The Waterproof
Housing can be submerged up to 30 meters (98 feet) with a water temperature between 69.8˚F ± 50˚F ( 21
± 10
). The Waterproof Housing accessory will
maintain its waterproof capabilities for up to 2 hours at a depth of up to 30 meters (98 feet) while fully submerged.
Please install the Anti-Fog ilm in a dry environment, so as not to a ect Anti-Fog ilm moisture absorption.
Anti-Fog Inserts are intended to help minimize and absorb unwanted moisture from within the waterproof enclosure. Please make sure the Anti-Fog Inserts
are completely dry before use by heating in a 176˚F (80°C) oven for approximately 5 minutes. Each Anti-Fog Insert can be used between 2 and 3 times.
The Anti-Re lective Patch is intended to reduce unwanted glare and re lections while used under water.
Please don't use the product in the scene of violent shock, such as motorboat. It may lead to waterproof shell damage and cause water leakage.
To open the Waterproof Housing, twist the front half of the Waterproof Housing's enclosure to the left and counter clockwise lock in the direction indicated
on the Waterproof Housing diagram below.
1
2
Never open the Waterproof Housing when submerged, around water or in wet conditions.
After employing the waterproof box in the water, please use a soft cloth to wipe the residual water droplets dry, and then put it into the holster.
70
Advertisement
Table of Contents
