Page 1
Ishida WM-Nano Cleaning, Sanitizing and Inspection Instructions Use the following instructions to clean, sanitize and inspect the WM-Nano. This document can be viewed and downloaded from the Rice Lake Weighing Systems website at: www.ricelakeretail.com WARNING Failure to heed may result in serious personal injury or death.
Page 2
Cleaning Procedure Use the following steps to start the cleaning procedure. 1. Press the button on the display. Cleaning Figure 2. Cleaning and Start Buttons 2. Press the button on the display. Start 3. Turn the machine off by rotating the power switch to the left. The power switch is located to the left of the infeed platter.
Page 3
6. Clean the lift unit, wrap plates and sealing roller with a damp cloth. Wrapping plates Sealing roller Lift unit Figure 5. Clean Lift Unit, Wrap Plates and Seal Roller Wait until the sealing roller has cooled down before cleaning. Touching the sealing roller when CAUTION it is hot may cause severe burns.
Page 4
Specifications subject to change without notice. Rice Lake Weighing Systems is an ISO 9001 registered company. 230 W. Coleman St. • Rice Lake, WI 54868 • USA U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319 www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com...