Charging The Product - Viking Magni 2500 User Manual

(3) Return to the main interface (Figure 1), click the "Data" bu�on to enter the page (Figure 4) :
●Click the "Product Info" bu�on, you can view the product model, control so�ware version, monitoring so�ware
version, BMS monitoring so�ware version and display so�ware version in turn;
●Click the " Inverter & Charger Info" bu�on, you can view the PV / Car opera�on and the adapter opera�on status ,DC
out opera�on and AC out opera�on in turn, which can also be accessed directly from the shortcut key on the main
interface;
●Click the "BMS Maintenance" bu�on, you can view the opera�on informa�on of BMS, and this part can also be acce-
ssed directly from the shortcut key in the main interface;
●Click the "Fault History/Alarm" bu�on, you can view all the fault informa�on generated by the machine. All the fault
codes recorded here. According to the fault codes, return to the main interface and click the fault bu�on to view the
corresponding fault informa�on. Fault History is retained up to 10 years if not manually cleared.
(Figure4)
(4) Return to the main interface and click the fault bu�on (Figure 1) to view the current
fault informa�on: the fault bu�on will display orange if there is a fault, click to enter the
corresponding fault informa�on, then the gray light will turn into orange.

Charging the product

There are four ways to charge:
(1) Charging mode 1: From AC Wall outlet
● Press the main power bu�on to start charging a�er connec�ng the product to the AC wall outlet, the charging will
automa�cally stop when it reaches 100%.
7