Advertisement
ADDITIONAL INFORMATION
USING CONDUIT WITH A COMPUTER
When USB is connected, the computer will recognize 6 MIDI I/O ports.
• Conduit MIDI Ports 1-4 correspond with the 1/4" TRS jacks numbered 1-4.
• Conduit MIDI Port 5 corresponds with the 5-DIN MIDI IN/MIDI OUT ports.
• Conduit MIDI Port 6 will appear as a background USB communication port.
The diagram above shows how the MIDI ports corresponding to each of the
devices connected to Conduit will show up in your computer/DAW.
MIDI PORTS
• Conduit (PORT 1)
• Conduit (PORT 2)
• Conduit (PORT 3)
• Conduit (PORT 4)
• Conduit (PORT 5)
• Conduit (PORT 6)
Port 6 is a background
communication port
used for updating
Conduit's firmware.
FEATURES
• One opto-isolated 5-pin DIN MIDI interface (IN and OUT ports)
• Four 1/4" TRS bi-directional MIDI ports
• Five MIDI status indicator LEDs
• One USB Type-C to USB-A Male cable
• Lightweight, compact anodized aluminum chassis with threaded
mounting hardware
WHAT'S IN THE BOX
• Conduit MIDI hub
• Four (4) 18" right-angle to
straight TRS cables
• One USB Type-C to USB-A
Male cable
• Drill Template
• Two (2) mounting screws
• Four (4) rubber feet
• Quick Start Guide
• Strymon sticker
Advertisement
