Advertisement
Quick Links
Advertisement
Related Manuals for Strymon Conduit
Summary of Contents for Strymon Conduit
- Page 1 QUICK START GUIDE...
-
Page 2: Controls And Connections
1/4" TRS MIDI I/O Jacks 1-4 All MIDI data sent back from 1/4" TRS connected Out of the box, Conduit’s 1/4" TRS MIDI jacks are configured to work with pedals is merged and sent to the MIDI OUT. Strymon pedals, with no further setup necessary. Each jack is capable... -
Page 3: Midi Controller
9VDC power input. Set the MIDI OUT mode on the pedal. If you are only sending When Conduit powers up, the LEDs will light up to show that MIDI data to the pedal without sending anything back out from the device is powered. The color of the four 1/4" OUTPUT LEDs the pedal, set the MIDI OUT of the pedal mode to OFF. -
Page 4: Additional Information
USING CONDUIT WITH A COMPUTER When USB is connected, the computer will recognize 6 MIDI I/O ports. • Conduit MIDI Ports 1-4 correspond with the 1/4" TRS jacks numbered 1-4. • Conduit MIDI Port 5 corresponds with the 5-DIN MIDI IN/MIDI OUT ports. - Page 5 CONDUIT MOUNTING INSTRUCTIONS Conduit features built-in threaded hardware for easy mounting on the top or bottom of most pedalboards. CHOOSE YOUR MOUNTING LOCATION Tape the Drill Template (included in this box) logo side up in the location you want to install your Conduit.
- Page 6 REV A...