Lenovo ThinkPad X1 Yoga Gen 5 User Manual page 60

5. Remove the wireless-WAN card:
a. Gently disconnect the wireless cable connectors with your fingers
secures the wireless-WAN card
b. Carefully remove the wireless-WAN card out of the slot
6. Install a new wireless-WAN card:
a. Align the contact edge of the new wireless-WAN card with the key in the slot. Then, carefully insert
the card into the slot at an angle of about 20 degrees
b. Install the screw to secure the wireless-WAN card in place
to the card 4 . Ensure that you connect the orange cable to the main connector on the card, and the
blue cable to the auxiliary connector on the card.
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
52
X1 Yoga Gen 5 and X1 Carbon Gen 8 User Guide
2 and the card pops up.
3
1 and pivot the card downward
1 . Then, remove the screw that
.
3 . Connect the wireless cable connectors
2 .