Pen charger (for X1 Yoga Gen 5 only)
Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close and computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 50.
5. Remove the screw that secures the pen charger
charger
3
.
1
and detach the connector
2
. Then, remove the pen
.
Chapter 7
CRU replacement
55