5. Remove the M.2 solid-state drive
a. Remove the screw that secures the M.2 solid-state drive
from the secured position and pivots upward.
b. Carefully remove the drive out of the slot
6. Install a new M.2 solid-state drive
a. Align the contact edge of the M.2 solid-state drive with the key in the slot. Then, carefully insert the
drive into the slot at an angle of about 20 degrees and pivot the M.2 solid-state drive downward
b. Install the screw to secure the M.2 solid-state drive
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
54
X1 Yoga Gen 5 and X1 Carbon Gen 8 User Guide
1
. The M.2 solid-state drive is released
2
.
2
.
1
.