Assembly; Loading The Cabinet; Record Of Satisfactory Condition; Inspections & Maintenance - Vestil CYL-H-4-KD Assembly And Maintenance Manual

Table of Contents
Step 7 – Attach door (7) to hinges
a. Align the free sides of the hinges with the hinge holes in the door.
b. Fasten the hinges to the door with flat head socket cap screws (#10-32 x 1in.) and 10-32 hex nuts.
c. Close the door and confirm that the latch fits through the latch opening in the door. The door should seat
into the door groove of the latch. See
d. The door can be locked by attaching a padlock to the opening in the end of the latch.
10-32 hex nut

LOADING THE CABINET

Each shelf will accommodate 2 cylinders stored horizontally.

RECORD OF SATISFACTORY CONDITION

Before putting the cabinet into service, record its condition. Thoroughly photograph the unit from multiple
angles. Take close range photographs of all labeling and fasteners (bolts, nuts, etc.). Photograph the entire
perimeter of the base of the unit where it contacts the ground. Include photographs of the latch mechanism and
the shelves. Collect all photographs in a single file and label the file appropriately to identify it. This file documents
satisfactory condition. Compare the results of all inspections to this record to determine whether the cabinet is in
satisfactory condition. Purely cosmetic changes, like damaged paint/powdercoat, do not constitute changes from
satisfactory condition. However, touchup paint should be applied to all affected areas as soon as cosmetic
damage occurs.
INSPECTIONS & MAINTENANCE
Compare the results of each inspection to the
condition. If repairs/replacement parts are necessary, restore the cabinet to satisfactory condition BEFORE
returning it to service.
1) Apply grease to the hinges whenever necessary, e.g. squeaky or noisy operation.
2) Inspect the cabinet at least once per month. Check for corrosion and rust especially where paint is damaged:
i) Remove rust with a steel bristle brush (or sandpaper) and apply touchup paint or clear finish to the
affected area;
ii) Inspect the base of the cabinet in contact with the ground:
Table of Contents
Rev. 8/21/2019
Step 4 on p. 6.
Flat head socket cap
screw #10-32 x 1in.
RD
Latch
opening
Record
Copyright 2019 Vestil Manufacturing Co.
Complete cabinet

assembly

to determine whether the cabinet is in satisfactory
CYL-H-16-KD MANUAL
Opening for padlock
Page 7 of 9