Night Owl VDP2 Series User Manual page 7

DVR Component Description
1
1. Video In: Connect your BNC wired cameras to one of these ports.
NOTE: The DVR automatically detects the camera. Before turning the DVR on, make
sure the cameras are connected to the DVR and a power source.
2. HDMI (Recommended): Connect your TV or monitor to this HDMI port using an HDMI
cable.
3. USB Ports: Connect a USB mouse or a USB flash drive to this USB port for video backup.
NOTE: DO NOT CONNECT two USB mice or two USB flash drives to the DVR.
4. LAN (Strongly Recommended): Connect your DVR to the Internet using an Ethernet cable.
5. Power Input: Connect the DVR power adapter to this port to power the DVR.
NOTE: Connect and test all cameras locally before you install in their final location to
ensure that all components function properly.
FRONT VIEW
REAR VIEW
2
4
3 5
3