Night Owl VDP2 Series User Manual page 19

3. Insert the screw anchors. Line up the camera base holes with the screw anchors, insert
the screws through the base, and tighten to secure the camera in place. Ensure you
feed the camera wire through the indent in the base as indicated by the green star in the
following illustration.
Add Additional Cameras
You can add additional cameras to your system at any time by following steps 6 - 9 in
Step 3 – Connect Your System and repeating the steps in this section.
Night Owl's VDP2 Series DVRs are compatible with the following cameras:
Congratulations
You are ready to start using your system! Refer to the Live View chapter of this manual
for more information on how Night Owl works and how to utilize all of its monitoring
features.
VDP2
CM-DP2L-BU
CM-TA2L-BU
CM-C2OXL-BU
CM-DP2BK-B
15