Disassembly Procedure - Lumix DMC-FP8P Service Manual

8.3.

Disassembly Procedure

No. Item
1 Rear Case Unit
2 LCD Unit
3 Front Case Unit
4 Rear OPE P.C.B.
5 Speaker
6 Gyro P.C.B.
7 Top OPE P.C.B.
8 Main P.C.B.
9 Lens Unit (with CCD)
10 Flash P.C.B.
11 Battery Case Unit
12 Battery Door Unit
Fig Removal
(Fig.D1) Card
Battery
2 Screws (A)
Side Ornament (L)
(Fig.D2) Jack Door
2 Screws (B)
5 Hanging Parts
Side Ornament (R)
3 Screws (C)
Bottom Ornament
(Fig.D3) 2 Locking tabs
Rear Case Unit
(Fig.D4) 2 Screws (D)
2 Locking tabs
1 Hanging Part
(Fig.D5) FP9003(Flex)
LCD Unit
(Fig.D6) 1 Screw (E)
1 Locking tab
Front Case Unit
(Fig.D7) NOTE: (When Installing)
(Fig.D8) PP9601(Connector)
Rear OPE P.C.B.
(Fig.D9) 4 Locking tabs
P.C.B. Spacer
P9001(Connector)
(Fig.D10) Speaker
(Fig.D11) 1 Screw (F)
FP9701(Flex)
Gyro P.C.B.
(Fig.D12) 2 Screws (G)
(Fig.D13) 2 Locking tabs
PS9501(Connector)
2 Locking tabs
2 Convexes
Top Base Unit
Top OPE P.C.B.
(Fig.D14) FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
3 Screws (H)
Main P.C.B.
(Fig.D15) 4 Locking tabs
Lens Plate
Lens Unit
(Fig.D16) 1 Screw (I)
1 Locking tab
(Fig.D17) Flash P.C.B.
(Fig.D18) 2 Locking tabs
Strap Holder
1 Locking tab
(Fig.D19) 1 Locking tab
Battery Out Spring
Battery Case Unit
(Fig.D20) 2 Battery Door Shafts
Battery Door Spring
Battery Door Unit
8.3.1. Removal of the Rear Case Unit
23
(Fig.D1)