Disassembly And Assembly Instructions; Disassembly Procedure - Lumix H-HSA12035 Service Training Manual

5

Disassembly and Assembly Instructions

5.1. Disassembly Procedure

5.1.1. Removal of the Zoom Rubber
1. Remove the Zoom Rubber.
Zoom Rubber
5.1.2. Removal of the Decoration Ring
1. The Decoration Ring is sticked on the Hood Adapter.
2. Put the sheet so that the lens glass is fullty covered.
3. Insert the small flat blade screwdriver to Gap (between
the Decoration Ring and lens glass), and peel off
the Decoration Ring gently.
5.1.3. Removal of the Hood Adapter and
the 1st Lens Unit
1. Remove the 4 screws (A) and the Hood Adapter
with the 1st Lens Unit.
Screw
Screw (A) ： 6.0mm (Silver)
(A)
2. Remove the 2 screws (B).
3. Separate the Hood Adapter and the 1st Lens Unit.
Screw (B)
Screw (B) ： 3.5mm (Silver)
5.1.4. Removal of the 5th Lens Unit
1. Remove the 3 screws (C) and the 5th Lens Unit.
Important：
Never touch the inside of the 5th Lens Unit,
because this place applied Nano Surface Coating.
Screw (C)
Screw (C) ： 2.5mm (Black)
7