Lumix H-HSA12035 Service Training Manual
  1. Manuals
  2. Brands
  3. Lumix Manuals
  4. Digital Camera
  5. H-HSA12035
  6. Service training manual

Lumix H-HSA12035 Service Training Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Service Training Manual
Specifications
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
"LUMIX G VARIO 12-35 mm/F2.8ⅡASPH./POWER O.I.S."
Focal length
Aperture type
Maximum aperture
Minimum aperture value
Lens construction
In focus distance
Nano surface coating
Maximum image magnification
Optical image stabiliser
[O.I.S.] switch
Mount
Angle of view
Filter diameter
Max. diameter
Overall length
Mass
Operating temperature
Dust-proof and splash-proof
H-HSA12035
Component Repair
f=12 mm to 35 mm
(35 mm film camera equivalent: 24 mm to 70 mm)
7 diaphragm blades/circular aperture diaphragm
F2.8
F22
14 elements in 9 groups
(4 aspherical lenses, 1 UED lens, 1 UHR lens)
1.5 m (4.9 feet) to ∞
(from the focus distance reference line)
Yes
0.17× (35 mm film camera equivalent: 0.34×)
Available
Available (Switching ON/OFF)
"Micro Four Thirds Mount"
84°(Wide) to 34°(Tele)
58 mm
Approx. 67.6 mm (2.7 inch)
Approx. 73.8 mm (2.9 inch)
(from the tip of the lens to the base side of the lens mount)
Approx. 305 ｇ (0.67 lb)
-10℃ to 40℃ (14℉ to 140℉)
Available
ⓒ Panasonic Corporation 2017 Unauthorized copying and distribution is a violation of law.
Ver.1.1
Internal use only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H-HSA12035 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lumix H-HSA12035

Summary of Contents for Lumix H-HSA12035

  • Page 1 Service Training Manual Ver.1.1 Internal use only Specifications INTERCHANGEABLE LENS FOR DIGITAL CAMERA “LUMIX G VARIO 12-35 mm/F2.8ⅡASPH./POWER O.I.S.” Focal length f=12 mm to 35 mm (35 mm film camera equivalent: 24 mm to 70 mm) Aperture type 7 diaphragm blades/circular aperture diaphragm Maximum aperture F2.8...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE 1 Service Navigation ・　・　・　・　・　・　・　・　・　・ ・　・　・　・　・　・　・　・　・　・ 1.1. Introduction ・　・　・　・　・　・　・　・　・　・ 1.2. Important Notice ・　・　・　・　・　・　・　・　・　・ 1.2.1. About 5th Lens Unit 2 Exploded View ・　・　・　・　・　・　・　・　・　・ 3 Replacement Parts List ・　・　・　・　・　・　・　・　・　・ 4 Service Fixture & Tools ・　・　・　・　・　・　・　・　・　・ ・　・　・　・　・　・　・　・　・　・ 4.1. Fixture and Tools ・　・　・　・　・　・　・　・　・　・...

  • Page 3: Service Navigation

    Please place orders using the parts list and not the drawing reference numbers. 1.2. Important Notice This manual is written for Micro Four Thirds Lens H-HSA12035. As you may know, lens hates dust, soil, sand, fingerprint. So that, you have to repair (disassembly / assembly) with close attention.

  • Page 4: Exploded View

    2 Exploded View B203 B201 B202 B204 B205 B206 B208 B209 B215 B216 B217 B214 B209 B210 206-1 B211 B212 B213...

  • Page 5: Replacement Parts List

    3 Replacement Parts List Definition of Parts Supplier ： All parts are supplied from AP-INBD. Ref.No. Part No. Part Name & Description Remarks P12F320 ZOOM RUBBER PB27HJ0 DECORATION RING PB2F030 HOOD ADAPTER P127Z10 1ST LENS UNIT P12F140 2ND LENS SHADING SHEET P12F020 FRONT BARREL P121060...
  • Page 6 P128H50 L MOUNT UNIT 206-1 9630230 LENS MOUNT RUBBER PB27Z60 5TH LENS UNIT *NOTE 1 37 - 42 0124730 P4 ROLLER 43 - 45 P127HA0 ZOOM GUIDE COLLAR ASSY 46 - 48 0150230 POLY SLIDER 3 t=0.05 46 - 48 0150250 POLY SLIDER 3 t=0.13...

  • Page 7: Service Fixture & Tools

    4 Service Fixture & Tools 4.1. Fixture and Tools The following Fixture and Tools are used for checking and servicing this unit. Lens Cleaning Kit Torque Driver Screw Driver Collimator VFK1900BK RFKZ0542 VFK1390 RFKZ0422 ＊Only supplied 10 set/box. Blower Gloves Stick Cloth Reference Camera...

  • Page 8: Maintenance

    5 Maintenance 5.1. Dust / Dirt on the outer casing part(s) 1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush. 2. Wipe up the outer casing part with the dry fuzz-free cloth. 5.2.

  • Page 9: Disassembly And Assembly Instructions

    Disassembly and Assembly Instructions 5.1. Disassembly Procedure 5.1.1. Removal of the Zoom Rubber 1. Remove the Zoom Rubber. 2. Remove the 2 screws (B). 3. Separate the Hood Adapter and the 1st Lens Unit. Zoom Rubber Screw 5.1.2. Removal of the Decoration Ring 1.
  • Page 10 5.1.5. Removal of the L Mount Unit and 5.1.6. Removal of the Mount Washer the Lens Mount Rubber 1. Remove the Mount Washer. 1. Remove the screw (D) and the screw (E). NOTE： 2. Remove the 4 screws (F). 1. There are several types of the Mount Washer 3.
  • Page 11 5.1.8. Removal of the Main PCB Assy 1. Disconnect the connector (B) ～ (E). 2. Remove the 4 screws (I) and the 2 screws (J). 2. Remove the Main PCB with the Mount Contact Unit. Screw Screw Screw (I) ： 5.0mm (Silver) 5.1.9.
  • Page 12 5.1.12. Removal of the Zoom Guide Collar Assy 5. Remove the Hold Barrel Unit. 1. Remove the 3 Zoom Guide Collar Assy. NOTE： Put the soft cloth to protect the 2nd Lens Unit sureface from damage. 5.1.11. Removal of the Front Barrel 1.
  • Page 13 5.1.14. Removal of the OIS Unit and the Housing & D Base Unit 2. Peel off the 2nd Lens Shading Sheet. 1. Remove the 3 screws (N) with the P4 Roller. 3. Remove the 3 screws (M) and the 2nd Lens Unit. Screw (N) ：...
  • Page 14 5.1.16. Separate the OIS Unit from the 5.1.17. Separate the Housing & D Base Unit Housing & D Base Unit and the FPC Guide 1 1. Remove the 3 screws (O). 1. Remove the screw (Q). 2. Remove the FPC Guide 1 from the Housing & D Base Unit. Screw (O) ：...
  • Page 15 2. Remove the AF Motor Assy from the OIS Aperture Flex. 3. Remove the 3 screws (T). 4. Remove the Main Shaft Holder and theSub Shaft Holder. Screw (T) ： 5.0mm (Silver) 5. Remove the 4th Lens & AF Rack Unit.

  • Page 16: Assembly Procedure

    5.2. Assembly Procedure Important： When tightening the screw, use a torque driver (RFKZ0542) with specified torque described in each step. 5.2.1. Assembly of the OIS Unit 1. Install the 4th Lens & AF Rack Unit. 5. Stick the AF Motor Flex on the OIS Aperture Flex. 2.
  • Page 17 5.2.2. Assembly of the Housing & D Base Unit 7. Apply Grease to the motor screw part of the AF Motor. 1. Install the FPC Guide 1 to the Housing & D Base Unit. 2. Tighten the screw (Q) by using the torque driver with specified torque.
  • Page 18 5.2.4. Installation of the Rotative Barrel to the Main Zoom Barrel 2. Tighten the screw (P) by using the torque driver with specified torque. 1. Apply Grease to the Main Zoom Barrel by following figure. Screw (P) ： 1.0mm (Silver) 7.8 ±...
  • Page 19 5.2.6. Installation of the 2nd Lens Unit 2. Align the mechanical phase by following figure. 1. Align the mechanical phase by following figure. 3. Tighten the 3 screws (N) by using the torque driver with specified torque, with the P4 Roller. 2.
  • Page 20 5.2.7. Installation of the Zoom Guide Collar Assy 4. Install the 2nd Lens Shading Sheet. 1. Install the 3 Zoom Guide Collar Assy. NOTE： Put the soft cloth to protect the 2nd Lens Unit sureface from damage. 5. Align the mechanical phase by following figure. 2.
  • Page 21 5.2.8. Installation of the Hold Barrel Unit 1. Insert the lower half of the Hold Barrel Unit by refering 4. Rotate the Zoom Ring to (A) direction, Zoom becomes the phase guide (A) and (B). "12mm". 5. Tighten the 4 screws (I) and the screws (J) in numerrical order by using the torque driver with specified torque.
  • Page 22 5.2.11. Installation of the OIS SW Unit and the Rear Frame Unit 6. Install the Zoom Lever. 7. Tighten the screw (H) by using the torque driver 1. Hook the upperside hook. with specified torque. Then, push the underside hook into. Upperside hook 2.
  • Page 23 5.2.13. Installation of the Lens Mount Rubber 5.2.14. Installation of the 5th Lens Unit and the L Mount Unit 1. Put the Poly Slider as it was. 1. Install the Lens Mount Rubber. Lens Mount Rubber 2. Install the L Mount Unit. 3.
  • Page 24 5.2.15. Installation of the Hood Adapter and the 1st Lens Unit 3. Install the 1st Lens Unit with the Hood Adapter. 1. Assemble the Hood Adapter and 1st Lens Unit. then, align the mechanical phase by following figure. then, align the mechanical phase by following figure. 2.
  • Page 25 5.2.16. Installation of the Decoration Ring 1. Insert the 4 Pins of the Decoration Ring to the hole of the Hood Adapter. ・Use new one, do not use the one which is removed. ・Double-stick tape sticks to the Decoration Ring of the repair part.

  • Page 26: Adjustment

    7 Adjustment 7.1. Matrix Chart for Replaced Part and Necessary Adjustment The relation between Replaced part and Necessary Adjustment is shown in the following table. When concerned part is replaced, be sure to achieve the necessary adjustment(s). Necessary Adjustment Replaced Part Electrical Adjustment - - - ZOOM RUBBER...

  • Page 27: Flow Chart For Adjustment

    7.3. Flow Chart for Adjustment * Note Electrical Finish * NOTE: Implement the re-assembly and re-exchange of replacement parts. 7.4. Procedure for Adjustment 7.4.1. Electrical Adjustment Make Electrical Adjustment using PC with Adjustment Software. As for Adjustment conditions/procedure, consult the "Adjustment Manual" which is available in Adjustment Software.

  • Page 28: Revision History

    8 Revision History Ver. Date History ・First Issue 2017.09.27 2018.04.12 1. Change of the parts number and the parts supply unit Ref.236 ： 5th LENS UNIT 　　　　　PB2F130 → PB27Z60 Changed to the parts supply unit including the lens (glass).

Table of Contents