Functional Description - Makita M6600 Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.
Switch action
CAUTION:
Before plugging in the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
for European countries
1
► 1. Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
for other than European countries
2
► 1. Lock button 2. Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
switched off and unplugged before carrying out
any work on the tool.
Installing the shaft
1. Tighten the shaft into the shaft holder till the hex
nut contacts with the shaft holder.
► 1. Hex nut 2. Shaft 3. Shaft holder
2. Hold the shaft holder with the wrench and tighten the
hex nut with the other wrench in the direction of arrow.
1
► 1. Wrench 2. Shaft holder 3. Wrench
Installing the mixing blade
1
To mount the mixing blade, install it with the " UP " mark
on it facing the tool (directing inside).
5 ENGLISH
Always be sure that the tool is
1
3
2
2
3