Specifications - Makita BO4555 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Orbits per minute (min
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply
of the same voltage as indicated on the nameplate,
and can only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model BO4555
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model BO4556
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model BO4557
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model BO4558
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Model
Pad size
-1
)
Net weight
Safety class
) : 80 dB (A)
pA
) : 82 dB (A)
pA
) : 93 dB (A)
WA
) : 76 dB (A)
pA
) : 79 dB (A)
pA
BO4555 BO4556
131 mm x 112 mm 131 mm x 112 mm x 141 mm
x 142 mm
1.1 kg
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model BO4555
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BO4556
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BO4557,BO4558
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
4 ENGLISH
BO4558
112mm ×102mm
14,000
131 mm x 112 mm
1.2 kg
/II
2
) : 2.5 m/s or less
h
2
2
) : 3.0 m/s
h
2
2
) : 3.5 m/s
h
2
BO4557
x 137 mm
1.0 kg