CDA CDI4251 Use And Maintenance page 8

Delay timer button
The dishwasher is equipped with a variable delay timer which can
be set between 1 hour and 19 hours. Pressing this button (4) once will
delay the start time for 1 hour, and continuing to press will increase the
delay time. Press the Delay button to change or cancel the delayed
start. If you switch off the machine while delay timer is active, the
delayed time is cancelled.
Half load button and indicator light
The dishwasher is equipped with a half-load function that allows for
small numbers of dishes to be washed, spread between both baskets.
This reduces the amount of water and electricity used.
To use this function, press the half-load button (5). The indicator light (6)
will illuminate and shows that this function is selected.
If you have selected the half-load function for a programme, then this
function will automatically be selected the next time the dishwasher
is used. To cancel the selection of this function, press the half-load
button (5) until the indicator light goes out.
Salt and rinse aid warning lights
When the dishwasher salt or rinse aid begins to run out, the relevant
warning light (7 or 8) will illuminate to advise that it needs refilling
• Then close the door. The dishwasher will begin the new programme
from the point at which the old programme stopped.
8